Instructions for setting up the some DirecTV remotes
Which remote do you have
DirecTV RC-66/66X/66RX
Configuring the DirecTV Remote: To program the DirecTV remote first slide the switch at the top to AV1 or AV2. Press and hold the MUTE and SELECT buttons until the green light at the top blinks twice then release. Using the number keypad enter the 5 digit device code from the table above. If done correctly the green light will blink twice after the last digit is entered. Note: On the DirecTV remote the Record button must be double pressed to activate the function.Use the following table if controlling a tape deck
JMP1 |
JMP2 |
Code |
Device Type |
JMP |
JMP |
20033 |
Beta VCR |
JMP |
OPEN |
20034 |
8mm VCR |
OPEN |
JMP |
20032 |
VHS VCR |
OPEN |
OPEN |
---- |
LDP |
Default jumper setting is JMP1 and JMP2 = JMP
RC-65 and RC-66 remotes do not support code 20034 (8mm VCR)
Use the following table if controlling a disc player or recorder
JMP1 |
JMP2 |
Code |
JMP |
JMP |
20533 |
JMP |
OPEN |
21070 |
OPEN |
JMP |
21432 |
OPEN |
OPEN |
21431 |
Default jumper setting is JMP1 and JMP2 = JMP